Run SPBM

VSP-8284XSQ:1(config)#run ?
Run commands
spbm  Run SPBM commands
VSP-8284XSQ:1(config)#run spbm
**********************************************************
*** This script will guide you through configuring the ***
*** Extreme Networks switch for optimal operation of SPB.         ***
*** Extreme Networks switch for optimal operation of SPB.         ***
*** —————————————————***
*** The values in [] are the default values, you can   ***
*** input alternative values at any of the prompts.    ***
*** If you wish to terminate or exit this script       ***
*** enter ^C <control-C> at any prompt.                ***
*** NOTE: THE COMMAND WILL TEMPORARILY FLAP IS-IS,SPBM ***
**********************************************************
SPB Ethertype <0x8100,0x88a8> [0x8100]:
SPBM instance <1-100> [1]:
SPB primary BVLAN <2-4059> [4051]:
SPB secondary BVLAN <2-4059> [4052]:
ISIS system id <xxxx.xxxx.xxxx> [0051.0064.c884]:
SPB nickname <x.xx.xx> [4.c8.84]:
SPB Manual Area <xx.xxxx.xxxx…xxxx> [49.0000]:
ISIS System Name [VSP-8284XSQ]:
Enable SPBM multicast (y/n) [n]:
Enable IP shortcuts (y/n) [n]:
Configure SPBM SMLT? (y/n) [n]:
ISIS port interfaces <a/b,c/d>[]:
ISIS MLT interface <MLT ID LIST> []:
Enable CFM SPBM (y/n) [n]:

****CONFIGURATION IN PROGRESS****

VSP-8284XSQ:1(config)#no router isis enable
VSP-8284XSQ:1(config)#router isis
VSP-8284XSQ:1(config-isis)#no ip-source-address
VSP-8284XSQ:1(config-isis)#no system-id
VSP-8284XSQ:1(config-isis)#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
VSP-8284XSQ:1(config)#spbm
VSP-8284XSQ:1(config)#spbm ethertype 0x8100
VSP-8284XSQ:1(config)#router isis
VSP-8284XSQ:1(config-isis)#spbm 1
VSP-8284XSQ:1(config-isis)#spbm 1 nick-name 4.c8.84
VSP-8284XSQ:1(config-isis)#spbm 1 b-vid 4051,4052 primary 4051
VSP-8284XSQ:1(config-isis)#vlan create 4051 type spbm-bvlan
VSP-8284XSQ:1(config)#vlan create 4052 type spbm-bvlan
VSP-8284XSQ:1(config)#router isis
VSP-8284XSQ:1(config-isis)#system-id 0051.0064.c884

Error: Attribute field already configured to the same value.

VSP-8284XSQ:1(config-isis)#manual-area 49.0000
VSP-8284XSQ:1(config-isis)#sys-name VSP-8284XSQ
VSP-8284XSQ:1(config-isis)#router isis enable
VSP-8284XSQ:1(config)#

****SCRIPT EXECUTION COMPLETE****
VSP-8284XSQ:1(config)#1 2018-05-16T11:03:24.585Z VSP-8284XSQ CP1 – 0x00000003 – 00000000 GlobalRouter SW INFO Dynamic nick-name client has been started
1 2018-05-16T11:03:24.707Z VSP-8284XSQ CP1 – 0x00000004 – 00000000 GlobalRouter SW INFO Dynamic nick-name client has been stopped

VSP-8284XSQ:1(config)#

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s